Liquid Detected In Lightning Connector

The iPhone alert “Liquid Detected in Lightning Connector” indicates that the charging port is wet. You can still use your phone, but until the dock is completely dry, you won’t be able to charge it with a lightning cable. But while you wait, you can use a cordless charger!

This warning message can prevent permanent damage to you and your device. Nevertheless, disconnecting the Lightning connector is insufficient; a few additional steps must be taken.

Therefore, to ensure everything is in its proper place and to prevent any additional damage that liquid may cause, you must employ a few precautionary fixing techniques.

Table of Contents

Reasons For The Warning:

Your iPhone may display Liquid detected in the lightning connector if there is liquid in your lightning connector or if you are using the incorrect lightning cable and a glitch on your iPhone is alerting you to a problem with your lightning cable.

Sometimes, instead of alerting you to a problem with your lightning cable, your iPhone will inform you that liquid has been detected in the lightning connector, even if the line is dry.

If you notice that the lightning connector is wet, you must remove the liquid from the connector. If the lightning connector is not damp and you still receive the error, you must replace your lightning cable and correct the issue.

Fake Lightning Cable:

A non-genuine lightning cable for your iPhone can cause it to send false warnings about liquid detection when the device is not wet. One of the effects is that the phone’s state-of-the-art system can detect a fake lightning cable.

Once this alert is activated, your phone will no longer charge. If the issue is a fake cable, the only solution is to purchase an original lightning cable.

Damaged Port:

A faulty charging port could explain why you receive a liquid detected alert even though the phone is dry. Several things can damage the charging port on your iPhone. Because the system detects moisture from the port, it is possible to receive a false signal, resulting in this warning.

Symptoms of a damaged port include insufficient charging, slow charging, a loose grip on the charging port, a non-charging phone, fluctuations in charging, and incorrect liquid detection warnings.

A charging port on an iPhone can be harmed by various factors, including corrosion from external substances, debris, dust, dirt, a bent connector, a broken charging port, or a loose charging port.

Exposed To Water:

The liquid detector system detects any moisture in the port for charging. It will issue a warning whenever any smoke is detected. If you have dropped your iPhone in the water, you should not be surprised to see this message.

You will receive this alert when water enters your iPhone due to a drop or contact with water around the charging port. Even after cleaning the phone, residual moisture in the charging port may cause this issue, and a warning will be issued.

Exposed To Dust:

Dust is a common external substance that can cause iPhone charging ports to malfunction. As dust accumulates in your charging port, it forms layers that impair the phone’s ability to detect your lightning cable.

This means that when the lightning cable is inserted, the phone can detect and send incorrect information regarding the availability of liquid, even when none is present.

Potential Fixes:

Following are some fixes you can try to get rid of the warning.

Dry Out The Moisture:

The initial step is to adhere to the message procedure. Remove the charging cable from the lightning port and allow it to dry. If your phone has internal moisture, you should keep it upright to allow the liquid to drain. During this process, you should not shake the phone or blow on the lightning port. It may worsen the situation.

Buy A MFI Certified Cable:

As previously mentioned, a fake cable is one of the potential causes of a false warning of liquid detection in iPhones. If you have recently replaced your lightning cable, you are likely using a counterfeit line.

It is essential to investigate and replace this cable with a certified one. When returning the line, you must obtain an authentic MFI-certified cable.

Here are the steps for determining if an iPhone lightning cable is authentic:

The packaging must bear an MFI symbol. Additionally, the cable will take the text “Designed by Apple in California and assembled in (Vietnam/China).” Next to this sentence will be a 12-digit serial number.
A certified original iPhone cable should measure approximately 12 inches from its USB connector.
The cable USB connector plates/contacts should be a single piece with a smooth, rounded, silver or gold-coloured appearance.
The apple boot should have a width of 7.7mm and a length of 12mm.
The faceplate must be metallic or grey in colour.
The interlocks on the USB shell are designed in a trapezoidal shape.
Additionally, the interlocks are evenly spaced from both edges.
The USB contacts are required to be gold-plated.
The USB surface and shell must be smooth and flat.

If the issue is with the cable, you can also try charging your iPhone at an angle to see if this resolves the problem.

Clean The Charging Port:

If dust is the cause, cleaning your iPhone’s charging port can fix this issue. However, specific steps must be adhered to avoid damaging the charging port. You should also avoid being aggressive and damaging the charging port through scraping.

Follow these steps to clean the charging port instead.

Start by turning off your phone. Next, navigate to the settings, select general, and then shut down.
Obtain a toothpick, then roll a cotton product or a small piece of paper into a tiny tip that will fit into the charging port
Carefully and slowly insert the cotton or paper piece with the tip into the port. Then, wiggle the end to loosen any dirt from the surfaces.
Now, use compressed air to blow out the charging port of any loose dirt.
Insert the lighting connector and then power on the phone.

Use Wireless Charger:

You can choose to charge your iPhone wirelessly if you wish to avoid all other options.First, you need a wireless iPhone charger. The charger will charge your phone similarly to a standard charger.

It is also a viable option when water is detected in the charging port. Wireless charging will keep you connected until the charging port issue is resolved.

For a visual representation, refer to the following video:

Conclusion:

The liquid detector system on the iPhone detects any moisture in the charging port. This alert will appear if water enters your iPhone due to a drop or contact with water near the charging port. The iPhone’s ability to detect your lightning cable may be interrupted from functioning correctly by dust.